22.12.2011, 16:45
|
#1 |
| Arcorneuling
Registriert seit: 24.11.2011 Beiträge: 4
|  802 Bootmenu + Bootlog über serielle Schnittstelle
Für interessierte Zeitgenossen, hier das Bootmenu und komplette Bootlog eines Vodafone 802 mit Firmware 20.02.226, erstellt über die serielle Schnittstelle auf der Platine: Zitat:
================================================== ======================
Wireless ADSL Gateway DANUBE Loader V1.00.01 build Sep 24 2008 10:11:06
Arcadyan Technology Corporation
================================================== ======================
MXIC MX29LV640BB bottom boot 16-bit mode found
Copying boot params.....DONE
Press Space Bar 3 times to enter command mode ...123
Yes, Enter command mode ...
[DANUBE Boot]:
======================
[#] Set Serial Number
[2] Use Normal Firmware
[3] Use ART-Testing Firmware
[9] Taggle ART Firmware Enable/Disable
[A] Set MAC Address
[E] Erase Flash
[G] Run Runtime Code
[H] Set Options
[P] Print Boot Params
[u] Upload to Flash
[V] Set Board Version
======================
[DANUBE Boot]:u
UPLOAD Flash
---------------------------------------
Area Address Length
---------------------------------------
[0] Boot 0xB0000000 128K
[1] Configuration 0xB0020000 256K
[2] None 0xB0060000 64K
[3] Special Area 0xB0070000 64K
[4] Primary Setting 0xB0080000 64K
[5] Code Image 0 0xB0090000 3776K
[6] Code Image 1 0xB0440000 3776K
[7] Boot Params 0xB07F0000 64K
[8] Flash Image 0xB0000000 8192K
---------------------------------------
Enter area to UPLOAD:
ERROR: Not a valid area.
[DANUBE Boot]:!
Enter Administrator Mode !
======================
[#] Set Serial Number
[2] Use Normal Firmware
[3] Use ART-Testing Firmware
[9] Taggle ART Firmware Enable/Disable
[A] Set MAC Address
[E] Erase Flash
[G] Run Runtime Code
[H] Set Options
[M] Upload to Memory
[P] Print Boot Params
[R] Read from Memory
[T] Memory Test
[u] Upload to Flash
[V] Set Board Version
[W] Write to Memory
[Y] Go to Memory
[Z] Dump DDR Ram Register
[0] Primary = Image 0
[1] Primary = Image 1
======================
[DANUBE Boot]:g
[1] Passed.
Image[1] at 0xb0440000, len:1765745, type:0
Image[2] at 0xb05ef400, len:766002, type:10
Image[3] at 0xb06aa800, len:241424, type:11
Image[4] at 0xb06e5800, len:229370, type:12
Image[5] at 0xb071dc00, len:150508, type:60
Image[6] at 0xb0742c00, len:452105, type:90
Firmware image at 0, ART image at -1
Run-up Normal Firmware...
Unzipping firmware [1(6)] at 0x80002000 ... [ZIP 3] [ZIP 1] done
Run-time code running ...
In c_entry() function ...
install_exception
Co config = 80008483
[INIT] Interrupt ...
DANUBE_BCU_CON:0x4009FFFF
DANUBE_BCU_ECON:0x00000000
DANUBE_BCU_EADD:0x00000000
DANUBE_BCU_ECON:0x00000000
DANUBE_SLAVE_BCU_CON:0x4009FFFF
DANUBE_SLAVE_BCU_ECON:0x00000000
DANUBE_SLAVE_BCU_EADD:0x00000000
DANUBE_SLAVE_BCU_EDAT:0x00000000##### _ftext = 0x80002000
##### _fdata = 0x8069F700
##### __bss_start = 0x80761998
##### end = 0x82B52CA4
allocate_memory_after_end> len 795288, ptr 0x82b5acb0
##### Backup Data from 0x8069F700 to 0x82B5ACA4~0x82C1CF3C len 795288
##### Backup Data completed
##### Backup Data verified
[GPIO FLOW] SetGpio() Begin ..
gptu: totally 6 16-bit timers/counters
Init timer = 0
************************ LED all ON
************************ LED all OFF
[GPIO FLOW] SetGpio() End.
[INIT] System Log Pool startup ...
[INIT] MTinitialize ..
[INIT] usrclk
CPU Clock 333333334 Hz
mips_counter_frequency:166666667
r4k_offset: 00028b0a(166666)
init_US_counter : time1 = 260457 , time2 = 40260484, diff 40000027
US_counter = 48
cnt1 40987788 cnt2 40990007, diff 2219
Runtime code version: 20.02.226
System startup...
[INIT] Memory COLOR 0, 3000000 bytes ..
[INIT] Memory COLOR 1, 262144 bytes ..
[INIT] Memory COLOR 2, 3516576 bytes ..
danube pci startup...
PCI clock 33.3MHz
cut-off PCI internal clock
DANUBE_GPIO_P1_ALTSEL0=5c7
DANUBE_GPIO_P1_ALTSEL1=0
DANUBE_GPIO_P1_DIR=a1fe
[PCI-SCAN] get PCI dev-0e, func-00(0x70), class:0x0280, vid:0x1814, did:0x0601
Scanning bus 00
Found 00:70 [1814/0601] 000280 00
Fixups for bus 00
Bus scan for 00 returning with max=00
[pcibios_init] PCI slot 0e, function 00...
06011814 04300007 02800000 00008000 18000000 00000000 00000000 00000000
00000000 00000000 ffffffff 28601814 00000000 00000040 00000000 04020100
MXIC MX29LV640BB bottom boot 16-bit mode found
Set flash memory layout to Boot Parameters found !!!
Bootcode version: V1.00.01
Serial number: R0032XXXXXX
Hardware version: 01
12.10.2010-18:55:44
[BUILD-WPA]: Key:D0BXXXXXX
[BUILD:PIN] PIN:R0032XXXXXX, MAC:0026XXXXXXXX
[BUILD-PIN]: PIN:07XXXXXX, len=8
MXIC MX29LV640BB bottom boot 16-bit mode found
MXIC MX29LV640BB bottom boot 16-bit mode found
...
(Rest siehe Anhang)
| |
| |
Ähnliche Themen 